MIL-DTL-52872D
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-130
-
Identification Marking of US Military Property.
MIL-STD-461
-
Electromagnetic Emission and Susceptibility
Requirements for the Control of Electromagnetic
Interference.
MIL-STD-889
-
Dissimilar Metals.
HANDBOOKS
DEPARTMENT OF DEFENSE
MIL-HDBK-454
-
General Guidelines for Electronic Equipment.
MIL-HDBK-781
-
Reliability Test Methods, Plans and Environments
for Engineering Development, Qualification and
Production.
(Unless otherwise indicated, copies of the above standards and handbooks
are available from the Standardization Document Order Desk, 700 Robbins
Avenue, Building 4D, Philadelphia PA 19111-5094.)
2.2.2. Government drawings. The following Government drawings form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues are those cited in the solicitation.
DRAWINGS
ME
TA13220E3201
-
Processor, Ultrasonic Motion Signal, MX-9444/FSS-9(V).
TA13220E3211
-
Circuit Card Assembly, Processor.
TA13220E3226
-
Transceiver, Ultrasonic Motion Signal,
RT-1161/FSS-9(V).
TA13220E3233
-
Circuit Card Assembly, Transceiver.
TA13220E3247
-
Transducer Kit - Transmit, (White Dot).
TA13220E3248
-
Transducer Kit - Receive, (Blue Dot).
13220E2976
-
Transducer.
(Copies of drawings required by contractors in connection with specific
acquisition functions should be obtained from: USA CECOM, IEWS Directorate,
ATTN: AMSEL-LC-IEW-E-CE, 10115 Gridley Road Suite 208, Fort Belvoir, VA
22060-5818.)
2.3. Non-Government publications.
The following documents form a part of
this document to the extent specified
herein. Unless otherwise specified, the
issues of the documents which are DoD
adopted are those listed in the issue of
the DoDISS cited in the solicitation.
Unless otherwise specified, the issues
of documents not listed in the DoDISS
are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ASQC-Z1.4
-
Sampling Procedures and Tables for Inspection by
Attributes.
ISO 10012-1
-
Quality Assurance Requirements For Measuring Equipment.
Part 1: Metrological Confirmation System For Measuring
Equipment.
(Application for copies should be addressed to: The American National
Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business