INCH-POUND
MIL-DTL-52872D
17 July 1998
SUPERSEDING
MIL-S-0052872C(ME)
27 January 1994
and MIL-S-52872B
24 March 1980
DETAIL SPECIFICATION
SENSOR GROUP, ULTRASONIC MOTION: TRANSCEIVER
RT-1161/FSS-9(V) AND PROCESSOR MX-9444/FSS-9(V)
Inactive for new design after 17 July 1998.
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1.
SCOPE
1.1. Scope. This specification covers an ultrasonic motion signal
transceiver and an ultrasonic motion signal processor which combine to form an
ultrasonic motion sensor, designed to detect the motion of an intruder inside
a protected space.
2.
APPLICABLE DOCUMENTS
2.1. General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2.
Government documents.
2.2.1. Standards and handbooks. The following standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the
Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: US Army CECOM RD&E Center, ATTN: AMSEL-LC-LEO-E-EB,
10115 Gridley Road, Suite 101, Fort Belvoir, VA 22060-5856 by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing
at the end of this document or by letter.
AMSC N/A
FSC 6350
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business