MIL-DTL-52869C
HANDBOOKS
DEPARTMENT OF DEFENSE
MIL-HDBK-454
-
General Guidelines for Electronic Equipment.
MIL-HDBK-781
-
Reliability Test Methods, Plans and Environments
for Engineering Development, Qualification and
Production.
(Unless otherwise indicated, copies of the above standards and handbooks
are available from the Standardization Document Order Desk, 700 Robbins
Avenue, Building 4D, Philadelphia PA 19111-5094.)
2.2.2 Government drawings. The following Government drawings form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues are those cited in the solicitation.
DRAWINGS
ME
TA13220E3101
-
Processor, Passive Signal Ultrasonic,
MX-9443/FSS-9(V).
TA13220E3111
-
Circuit Card Assembly, Processor.
TA13220E3151
-
Receiver, Passive Signal Ultrasonic,
RT-1860/FSS-9(V).
TA13220E3163
-
Circuit Card Assembly, Receiver.
(Copies of drawings required by contractors in connection with specific
acquisition functions should be obtained from: USA CECOM, IEWS Directorate,
ATTN: AMSEL-LC-IEW-D-CE, 10115 Gridley Rd., Suite 228, Ft Belvoir VA
22060-5849).
2.3 Non-Government publications. The following documents form a part of
this document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted are those listed in the issue of
the DoDISS cited in the solicitation. Unless otherwise specified, the issues
of documents not listed in the DoDISS are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ASQC-Z1.4
-
Sampling Procedures and Tables for Inspection by
Attributes.
ISO 10012-1
-
Quality Assurance Requirements For Measuring Equipment
- Part 1:
Metrological Confirmation System For
Measuring Equipment.
(Application for copies should be addressed to: The American National
Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036).
AMERICAN WELDING SOCIETY (AWS)
D9.1 - Welding of Sheet Metal.
(Application for copies should be addressed to: American Welding Society,
550 NW LeJeune Road, PO Box 351040, Miami FL 33135.)
2.4 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business