INCH-POUND MIL-S-52860D
6 December 1990
SUPERSEDING
MIL-S-0052860C(ME)
21 Aug 84 and
MIL-S-52860B
25 April 1979
MILITARY SPECIFICATION
SWITCH, ALARM, LATCHING, SA-1954/FSS-9(V)
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a floor or wall mounted manually operated duress switch which allows an alarm to be initiated by its operator when placed under duress. It is a component of the Joint-Services Interior Intrusion Detection System (J-SIIDS).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are needed to meet the requirements specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: USA Communications-Electronics Command, CECOM RDE Center, ATTN:
AMSEL-LC-IEW-D-ED, 10115 Gridley Road Suite 228, Fort Belvoir, VA 22060-5849
by using the self-addressed Standardization Document (Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 6350
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business